- Methodology article
- Open Access
Fusion primer and nested integrated PCR (FPNI-PCR): a new high-efficiency strategy for rapid chromosome walking or flanking sequence cloning
BMC Biotechnology volume 11, Article number: 109 (2011)
The advent of genomics-based technologies has revolutionized many fields of biological enquiry. However, chromosome walking or flanking sequence cloning is still a necessary and important procedure to determining gene structure. Such methods are used to identify T-DNA insertion sites and so are especially relevant for organisms where large T-DNA insertion libraries have been created, such as rice and Arabidopsis. The currently available methods for flanking sequence cloning, including the popular TAIL-PCR technique, are relatively laborious and slow.
Here, we report a simple and effective fusion primer and nested integrated PCR method (FPNI-PCR) for the identification and cloning of unknown genomic regions flanked known sequences. In brief, a set of universal primers was designed that consisted of various 15-16 base arbitrary degenerate oligonucleotides. These arbitrary degenerate primers were fused to the 3' end of an adaptor oligonucleotide which provided a known sequence without degenerate nucleotides, thereby forming the fusion primers (FPs). These fusion primers are employed in the first step of an integrated nested PCR strategy which defines the overall FPNI-PCR protocol. In order to demonstrate the efficacy of this novel strategy, we have successfully used it to isolate multiple genomic sequences namely, 21 orthologs of genes in various species of Rosaceace, 4 MYB genes of Rosa rugosa, 3 promoters of transcription factors of Petunia hybrida, and 4 flanking sequences of T-DNA insertion sites in transgenic tobacco lines and 6 specific genes from sequenced genome of rice and Arabidopsis.
The successful amplification of target products through FPNI-PCR verified that this novel strategy is an effective, low cost and simple procedure. Furthermore, FPNI-PCR represents a more sensitive, rapid and accurate technique than the established TAIL-PCR and hiTAIL-PCR procedures.
The advent of the genomics era has had a massive impact on almost all fields of biological enquiry. However, it is still necessary to employ chromosome walking and flanking sequence cloning procedures in order to determine full gene structure. Such methods are also required to identify T-DNA insertion sites, and this is particularly relevant for species where large T-DNA insertion libraries exist, eg. rice and Arabidopsis [1–3]. Currently, a number of PCR-based methods are available for these purposes, including random PCR, inverse PCR, panhandle PCR, and cassette PCR. However, each of these methods has drawbacks when considered for wide use in the amplification of target regions. For example, inverse PCR is rarely used for chromosome walking due to problems with the availability of restriction sites in the unknown/known regions, and/or poor circularization of the template molecule [3, 4]. Ligation-mediated PCR has proved to be too inefficient for routine use in flanking sequence identification, with non-specific amplified products accounting for the major proportion of the final PCR products [2, 4, 5].
In recent years, improved methodologies have been developed to address the problems outlined above [3–11]. The most successful of these involve PCR procedures using random primers, notably, the thermal asymmetric interlaced (TAIL)-PCR method. Such methods are relatively low cost and have the advantage of being relatively direct, i.e. there is no requirement for intermediate steps involving restriction enzyme digestion of the DNA template or ligation reactions [3–5]. Consequently, TAIL-PCR has been widely used, notably for the amplification of junction DNA at T-DNA insertion sites [1, 12–14], the rapid isolation of promoter sequences , and the cloning of full length functional genes [9, 15]. However, TAIL-PCR is a time consuming procedure that usually involves three rounds of amplification with each round consisting of multiple PCR cycles. The method often produces nonspecific amplification products due to the short arbitrary degenerate (AD) primers and low annealing temperatures, and may also achieve non-efficient amplification of target sequences [2, 4]. Furthermore, conventional TAIL-PCR tends to produce small amplification products [5, 16, 17]. TAIL-PCR has subsequently been adapted, but the improved high-efficiency (hi) TAIL-PCR version still remains time consuming, and is expensive in terms of primer design and synthesis. The hiTAIL-PCR technique also poses a great challenge to the activity of DNA polymerase, and so is frequently associated with inefficient amplification results.
Recently, several alternative methods have emerged to perform chromosome walking or flanking sequence cloning. However, such methods still have the drawback that they are either restriction enzyme-dependent, Phi29 DNA polymerase-dependent, or require a series of template DNA purification steps [2, 6, 17]. Thus, these alternative methods are still laborious and do not display the wide application potential of conventional TAIL-PCR. Therefore, it is highly desirable that further novel methods are developed for rapid and efficient chromosome walking or flanking sequence cloning.
In order to acquire precise flanking fragments rapidly, we have developed a novel efficient method, namely fusion primer and nested integrated-PCR (FPNI-PCR). We believe that this method has the potential to have wide-spread application in genetics and genome walking studies, and is applicable throughout diverse organisms. In order to demonstrate the power of FPNI-PCR, we performed long PCR walking tests on various genomic targets namely, FT, TFL1 and SOC1 orthologs from the Spiraea cantoniensis, Pyracantha fortuneana, Photinia serrulata, Fragaria ananassa, Rosa hybrida, Prunus mume and Prunus yedoensis species of Rosaceace, 4 MYB genes of Rosa rugosa, 3 promoters from MADS-box transcription factors of Petunia hybrida, and 4 flanking sequences of T-DNA insertion sites in Nicotiana. In each case, successful amplification was achieved of the unknown genomic DNA fragments (> 100 kb sequences). In addition, comparison with genomic sequence databanks confirmed that FPNI-PCR successfully amplified various lengths of the flanking regions of 3 members of the wuschel gene family from Arabidopsis, also the flanking regions of the Osft, Osmads1 and Ostuba1 genes from rice, and an archived flanking sequence from the pCAMBIA2300 vector. Furthermore, a comparative analysis with conventional TAIL-PCR indicated that our novel FPNI-PCR method is more flexible, time saving and powerful than TAIL-PCR or hiTAIL-PCR. Thus, FPNI-PCR has high potential for application in identifying tagged sequences, or for genomic walking from known DNA regions toward unknown regions in organisms with a large genome.
Principle of FPNI-PCR
The basic principle of FPNI-PCR is outlined in Figure 1 and 2. The method centers on a series of primers encompassing sequence-specific primers (designed on regions of known DNA sequence), and fusion primers which contain an arbitrary degenerate (AD) section fused to a section of determined sequence (fusion primers). The fusion of a known adaptor of determined sequence to the 5'-end of an AD (or other short site-dependent primer) is the main characteristic of FPNI-PCR (Figure 1a), and it is this trait which differentiates FPNI-PCR from TAIL-PCR (Figure 1b). The FPNI-PCR protocol contains three key steps. In the first step, a large complex mixture of DNA reactions is prepared using 0.4 μL of a gene-specific primer (SP1) designed to the genomic region of known sequence, and 2.0 μL of a combination of nine fusion arbitrary degenerate primers (eg. FP1-9; Table 1); other designed primers for FPNI-PCR are presented in Additional files 1 Tables S1-S5. The details of cycling parameters and PCR conditions used in this study are listed in Table 2. This first step consists of 3-6 repeats of two high stringency cycles followed by a low stringency cycle. Theoretically, single stranded PCR products from the gene-specific primer are generated during the high stringency cycles, and double-stranded products utilizing the FP primers (FPs) are developed during the low stringency cycle. After 3-6 repeated cycles of this PCR regime, it is predicted that the intended target products are partially synthesized and are accompanied by other, nonspecific, products (Figure 2). In the second and third steps, nested PCR is conducted using 1 uL of target-specific primers (SP2/SP3, respectively) and FP-specific primers (FSP1/FSP2, respectively). These steps are high stringency PCR using high annealing temperatures so that target products are selectively amplified. Nonspecific products are not amplified in these steps, in part due to the nested approach with different primers. In addition, the large hairpin structure employed in some nonspecific products also contributes to prevent to further amplification (suppression PCR). Thus, the nonspecific products generated from the first PCR step in FPNI-PCR are not amplified in the second and third steps, and become substantially diluted in the final mix (Figure 2).
Parameters in the design and optimization of FPNI-PCR
We compared two types of AD primers. In the basic form, i.e. type I primers, the AD primer was fused to the 3' end of an adaptor of known sequence (Table 1). Type II primers included a hairpin structure at the 5'end of the single-stranded adaptor (Additional files 1, Table S2). We compared the results from such type I and type II primers by testing them in combination with the same gene-specific (SP) primers and under the same cycling parameters. The final results of amplification of the target products indicated no obvious differences between the two primer types, i.e. they presented similar sizes of products on the agarose gels (data not shown). Thus, the hairpin structure at the 5'end of the type II single-stranded adaptors had no apparent impact on amplification of the target. Type III primers describe arbitrarily degenerative primers with 4-6 fixed nucleotides at the 3' end (Additional files 1, Table S3), and these primers were also successfully used to amplify the flanking regions of known fragments, with the various sizes of the product fragments relating to the given fusion primer.
The primary round of PCR in the FPNI-PCR procedure includes an optional low stringency PCR cycle (eg. 94°C for 15 s, 28°C for 1 min, ramping to 72°C over a period of 3 min, 72°C for 2.5 min), to follow the two high stringency PCR cycles (Figure 2). We tested six different annealing temperatures in these low stringency cycles, using SP1 and various FP primers (Table 1), and found an effect on the final products obtained (see Additional file 2, Figure. S1 and Figure 3 for example of products obtained during cloning of the FT ortholog of Fragaria ananassa). However, all of the reactions yielded flanking regions and the patterns of amplified fragments after the secondary round of PCR (Figure 3) exhibited strong similarities despite the differences in annealing temperatures of the first PCR step. In many cases, lower annealing temperatures in the low stringency cycles of the first PCR step yielded fewer amplified products (Figure 3). This influence of annealing temperature of the low stringency cycle was confirmed by repeated experiments for the cloning of various genes and T-DNA insertion loci. However, if the low stringency cycle of the first FPNI-PCR step was entirely omitted, successful amplification of the target product was still achieved (data not shown).
Effectiveness and accuracy of FPNI-PCR
Using the FPNI-PCR approach, we have successfully isolated 21 complete genomic sequences containing the FT, TFL1 and SOC1 gene orthologs from seven Rosaceace species, namely Spiraea cantoniensis, Pyracantha fortuneana, Photinia serrulata, Fragaria ananassa, Rosa hybrida, Prunus mume and Prunus yedoensis. In addition, we have used FPNI-PCR to isolate four MYB genes of Rosa rugosa, three promoters from the MADS-Box transcription factor family of Petunia hybrida, and four T-DNA flanking sequences in transgenic tobacco lines. All of these reactions were conducted using a total of just nine FP primers (FPs), in conjunction with specific primers designed to the conserved/partially known genomic fragments or known T-DNA sequences. Sequences have been deposited in the Genbank library, as shown in Table 3.
Figure 4 shows examples of the products amplified following the tertiary round of PCR in the FPNI-PCR method. Figure 4 shows the products relating to cloning of the FT-Like gene of Rosa rugosa. Figure 4b and 3c show the products arising during the cloning of T-DNA flanking sequences using forward and reverse sequence-specific primers, respectively, in three different transgenic tobacco plants and using various FPs. In addition, based on known genomic sequence fragments, we used FPNI-PCR to amplify the various lengths of products from the expected flanking regions of 3 different members of the wuschel gene family of Arabidopsis (Additional file 2, Figure. S2a), and sequence from the flanking regions of Osft, Osmads1 and Ostuba1 genes of rice (Additional file 2, Figure. S2b). Even for the small DNA molecular size of the pCAMBIA2300 vector, the flanking DNA fragment was amplified successfully using FPNI-PCR (data not shown).
Comparative experiments using the same specific primers showed that, in most cases (data not shown), longer products could be obtained by FPNI-PCR than by TAIL-PCR (Figure 5a and 5b). Furthermore, FPNI-PCR was found to be more reliable as a method of amplifying target genes and unknown flanking sequences. Thus, in a comparative test using several appropriate AD primers, TAIL-PCR frequently failed to amplify the predicted DNA fragment. Figure 5a shows the results of TAIL-PCR in the cloning of the FT ortholog from Pyracantha fortuneana using 3 gene-specific primers and the FP1-9 arbitrary degenerate primers. In this experiment, a 510 bp fragment was obtained from TAIL-PCR with just one (i.e. the fourth) AD primer. By contrast, Figure 5b shows the products generated by FPNI-PCR using the same primers for the same genome walking experiment. Here, four of the FPNI-PCR reactions amplified specific fragments, and the longest fragment was ca. 1.7 kp. Genomic walking for the SOC1-like gene in Pyracantha fortuneana provided another situation in which we encountered "off-target" results using TAIL-PCR, whereas, using the FPNI-PCR method we obtained two specific fragments of 2068 bp and 683 bp (Figure 5c and 5d). Sequence analysis of 102 amplified DNA fragments resulting from the FPNI-PCR technique showed that they corresponded with 100% accuracy to the target products.
Efficiency of FPNI-PCR
FPNI-PCR facilitates the rapid identification of target genomic sequences by permitting the use of short-cuts for a number of the steps between tissue isolation and target product sequencing, thereby reducing the input of time and effort compared to other current methods of flanking sequence cloning. For example, FPNI-PCR can be employed to generate target genomic products when cell lysates are used to supply the DNA templates (Figure 4). For this procedure, we extracted cell lysates from the young leaves of transgenic tobacco, petunia hybrida and Rosa hybrida using the rapid NaOH extraction method. We found no difference in the success of target product amplification from these cell lysates compared to that from the higher quality DNA templates as purified by the CTAB method. In addition, we found no differences between the results of direct sequencing of the FPNI-PCR products compared to indirect sequencing of the cloned products within the PMD18-T vector. FPNI-PCR has the advantage that, after the first step (12-15 cycles), we can proceed to the second step directly, without requiring the prior dilution of the products from the first PCR step. When using such practices, we commonly achieved > 85% positive cloning of target products following the secondary PCR reaction. Thus, we were able to amplify target products using just 42-45 PCR cycles, and this was completed in less than 3 hours from the start of tissue extraction. When proceeding through the third PCR and final sequencing steps, FPNI-PCR was found to provide 100% positive results in our working tests of genomic cloning. In total, the procedure was completed in just 54-57 cycles, taking less than 4 hours.
FPNI-PCR involves a novel strategy of amplification
The FPNI-PCR strategy is based on the following technical points. (1) The arbitrary degenerate oligonucleotides forming the 3' section of the FP primers (FPs) have been designed with the intention of maximizing the level of similarity with common genomic oligo sequences throughout the various taxa. (2) During the first PCR step, the 3'-ends of the oligos forming the arbitrary degenerate portions of the FPs (which also include several fixed bases at the 3'-end) need to pair effectively with selected sites of high similarity in the single-stranded DNA template. A lower annealing temperature may be used to increase mismatch sites and, thereby, enlarge the universality of the designed fusion primers. Between 1 and 6 cycles in the first PCR step are used to ensure that the desired target products are present within the amplified mix. (3) In the secondary and tertiary PCR steps, the target DNA should be exponentially amplified via high stringency cycles, while non-target products are not amplified by the gene-specific and FP-specific primer pairs. Off-target amplification may also be suppressed by the stem-loop structure of nonspecific DNA products. The use of high stringency PCR cycles encourages the efficient and specific amplification of the target products, while off-target PCR products are progressively diluted. This aspect of the FPNI-PCR strategy represents a key difference from the TAIL-PCR method developed by Liu and Whittier . TAIL-PCR employs multiple low stringency annealing cycles and, thus, nonspecific products are readily amplified. In TAIL-PCR, enrichment of the target products relies upon the difference in amplification velocity between the target and non-target products. Thus, the TAIL-PCR protocol involves two rounds of laborious DNA dilutions and numerous (approx. 110) cycles of PCR . An improved method, named hiTAIL-PCR, similarly involves two rounds of laborious DNA dilutions and multiple low and high stringency PCR cycles, thereby still providing opportunities for nonspecific product amplification . In addition, hiTAIL-PCR is uneconomical in terms of primer design, with the secondary gene-specific primers requiring the addition of > 20 nucleotides .
FPNI-PCR represents a very powerful tool in genomic walking and flanking sequence cloning
TAIL-PCR has been widely used for genome walking and flanking sequence cloning in plants and other organisms. Commonly, however, specific products appear in the second round of PCR only to disappear during the third round of PCR . Liu and Chen reported that just 60% of reactions yielded specific products . Our own tests of the TAIL-PCR method found that, on some occasions, no product was observed even after three rounds of PCR. Generally, smaller and fewer products were generated by TAIL-PCR as compared to the corresponding reactions using FPNI-PCR (Figure 5).
For inverse and ligation-mediated PCR-based genome-walking methods, successful amplification of target products relies on the restriction fragmentation of genomic DNA. When employing such techniques, we also encountered some "off-target" situations, possibly due to the location of the available restriction sites relative to the locus-specific primer . By contrast, repeated tests of the FPNI-PCR method using the nine given FP primers revealed no "off-target" cases, and more than 80% of FPNI-PCR reactions yielded DNA fragments larger than 1.0 kb. Thus, our results indicate that FPNI-PCR is a more powerful technique for genomic walking and flanking sequence cloning studies. In addition, the FPNI-PCR method makes it feasible to amplify large sections of specific DNA fragments. This can be achieved through the control of annealing temperatures during the low stringency cycles of the first PCR step. The control of this parameter can also be used to avoid the cloning of "off target" flanking sequences.
FPNI-PCR is a simple and rapid method of genomic walking and flanking sequence cloning
Methods involving inverse PCR and ligation-mediated PCR techniques suffer from the requirement for complicated manipulations, such as restriction cleavage, ligation, or tailing before PCR amplification [6, 7, 9]. Consequently, the use of such methods to successfully amplify and clone the target product usually requires a time-scale exceeding one working day. Similarly, the successful application of TAIL-PCR or hiTAIL-PCR methods is also time-consuming, with the time taken to perform the necessary number of PCR cycles (approx. 110) requiring a full working day (and this is even before the time taken to perform the various dilution steps is considered) [1, 3]. Using FPNI-PCR, a total about 42-45 cycles (requiring less than two hours) can be adequate to produce a good rate of success in target product amplification and, in our hands, a total of 54-57 cycles (completed in less than 4 hours) ensured a successful result in 100% of cases. Both TAIL-PCR and FPNI-PCR methods demand only extremely modest levels of quantity and purity of the template DNA, thus, they can work well with both cell lysates and crude DNA extracts. Using FPNI-PCR, however, we were able to choose a wider range of annealing temperatures during the low stringency cycles of the first PCR step, thereby extending the scope of target product that could be successfully amplified. The currently widely used Genome Walker Kit from Clontech employs restriction enzyme cleavage of DNA and adaptor-ligated genomic DNA construction, and also involves a nested PCR strategy. The procedures of integrated restriction cleavage, ligation and tailing make the Genome Walker Kit a substantially more complicated and time-consuming process than the first PCR step of FPNI-PCR. Thus, we believe that in comparison to the other reported methods of genomic walking and flanking sequence cloning [[3, 15, 18, 19], and references as above], FPNI-PCR is technically less demanding and is more time-efficient.
FPNI-PCR is highly effective and accurate
We conducted 60 rounds of FPNI-PCR reactions using the nine given FP primers, and in each case we successfully amplified products and experienced no "off-target" results. This contrasts to the experiences when employing ligation-dependent PCR methods, when it is often a problem to find available restriction sites and obtain ligation products . In addition, sequence analysis of 102 amplification products from FPNI-PCR indicated that the accuracy of positive cloning in our experiments was 100%. By comparison, 60-80% of reactions yielded specific products according to the original TAIL-PCR technical report , and a success rate of 93% was recorded for the improved hiTAIL-PCR procedure . Thus, we conclude that FPNI-PCR shows a substantially higher level of effectiveness than the established TAIL-PCR procedures. We suggest that the high rate of positive amplification results, at least partially, from the high stringency PCR cycles in the second and third PCR stages of the FPNI-PCR protocol.
To date, TAIL-PCR has been widely used for genome walking and flanking sequence cloning in molecular biology research, but it is still laborious and time-consuming. Recently, several alternative methods have been introduced [2, 6, 17], including the Genome Walker Kit from Clontech, but these methods still involve the use of restriction enzyme-mediated digestion, Phi29 DNA polymerase-mediated amplification, and a series of template DNA purification steps. Here, we report a simple and effective PCR method namely, fusion primer and nested integrated PCR (FPNI-PCR). This method is based on the use of arbitrary degenerate nucleotides reflecting natural restriction sites or site-dependent nucleotides in the genomic DNA to design universal primers. These FP primers are used to conduct the first round of PCR, which is followed by two to three rounds of nested PCR. We undertook a large number of experiments using FPNI-PCR in order to robustly demonstrate that this novel method has the capability to be more powerful, effective and accurate than the established TAIL-PCR method. Furthermore, the FPNI-PCR method is completed in a shorter time-scale than other widely-used genome-walking techniques, and is significantly less technically complex to perform.
Genomic DNA isolation
Genomic DNA of seven Rosaceace species, namely, Pyracantha fortuneana, Prunus mume, Photinia serrulata L., Prunus persica, Spiraea cantoniensis L., Rosachinensis and Fragaria × ananassa, was extracted from young leaves according to the procedure of Yang et al . In addition, genomic DNA of tobacco, Petunia hybrida, Arabidopsis and rice was isolated from young leaves according to the NaOH fast extraction method, as reported previously .
All sequence specific primers were designed using Primer5 software (see Additional files 1, Table S4), and annealing (Tm) temperatures ranged from 60°C to 72°C. For the design of the arbitrary degenerate primers (ADs), AD sequences were either collected from the existing literature or were designed by us (Additional files 1, Table S1). The AD oligos were fused to the 3' end of an adaptor oligo which supplied a known sequence of 31 fixed (i.e. non-degenerate) nucleotides, thereby forming the fusion primers (FPs). The simplest form of these FPs is termed type I primers (Table 1). Type II primers are designed to include a hairpin structure within the 5' end of the single-stranded adaptor regions (Additional files 1, Table S2). Type III primers are arbitrary degenerative primers that contain just 4-6 fixed nucleotides at the 3' end (Additional files 1, Table S3). Figure 1a illustrates the schematic relationship between the sequence-specific and arbitrary degenerate primers with the target genomic sequence or flanking sequence of a T-DNA insertion. All primers used in this study were synthesized by Invitrogen Co. Limit, and are summarized in Table 1 and Additional files 1, Tables S1-S5. The annealing (Tm) temperatures of the arbitrary degenerate primers (ADP) used in this study ranged between 36°C and 48°C. Tm values were estimated by using the formula: Tm = 81.5 + 16.6 × Log10[Na+] + 0.41 (%GC) - 600/total number of nucleotides.
PCR conditions, procedures and gel analysis methods
All FPNI-PCR procedures were arranged in three stages. The first stage involved a PCR step which was performed in a total volume of 20 μL, and contained 1-2 μL of the DNA products (i.e. 2 μL DNA extraction solution from the NaOH fast extraction method), 0.2 μM gene-specific primers (SP1), 1.0 μM fusion arbitrary degenerate primers and 1 U rTaq (Takara). Between 9-18 PCR cycles were performed using annealing temperatures ranging between 28°C and 52°C (full details of the conditions used are given in Table 2). In the second and third PCR stages, gene-specific primers (SP2 and SP3) and adaptor-specific primers (FSP1 and FSP2) were used in place of the SP1 and fusion arbitrary degenerate primers, respectively; the schematic arrangement of these primer pairs with respect to the target genomic DNA is illustrated in Figure 2a. Due to the exact primer-template match for the primer pairs used in the second and third PCR steps, high stringency cycles were employed in these two latter stages (details shown in Table 2). For the second PCR step, a 1.0 μL aliquot of the first PCR product pool was used as the template. Following this second round of selective amplification, the secondary PCR products were diluted 50-fold with MQ water and 1 μL of the dilution was added as template to 20 μL volumes of the tertiary PCR mixtures. For visualisation of the products amplified following the second or third FPNI-PCR steps, a 5-8 μL aliquot was separated by electrophoresis in a 1.5% agarose TAE gel, then stained with ethidium bromide and observed under a UV illumination system.
For direct sequencing, the remaining 12-15 μL of PCR products were purified through a Sephadex G-50 column and subjected to sequencing procedures using SP3 primers designed to known sections of the target sequence, or FSP2 primers designed according to the original FP primers. For indirect sequencing, bands corresponding to the largest products were excised from the agarose gels, purified and cloned into a pMD18-T TA cloning vector (TaKaRa), and then sequenced with M13 forward or reverse primers.
Liu YG, Mitsukawa N, Oosumi T, Whittier RF: Efficient isolation and mapping of Arabidopsis thaliana T-DNA insert junctions by thermal asymmetric interlaced PCR. The Plant Journal. 1995, 8: 457-463. 10.1046/j.1365-313X.1995.08030457.x.
Ji JB, Braam J: Restriction Site Extension PCR: A Novel Method for High-Throughput Characterization of Tagged DNA Fragments and Genome Walking. Plos One. 2010, 5: 1-5.
Liu YG, Chen YL: High-efficiency thermal asymmetric interlaced PCR for amplification of unknown flanking sequences. BioTechniques. 2007, 43: 649-656. 10.2144/000112601.
Tonooka Y, Fujishima M: Comparison and critical evaluation of PCR-mediated methods to walk along the sequence of genomic DNA. Appl Microbiol Biotechnol. 2009, 85: 37-43. 10.1007/s00253-009-2211-5.
Yan YX, An CC, Li L: T-linker-specific ligation PCR (T-linker PCR): an advanced PCR technique for chromosome walking or for isolation of tagged DNA ends. Nucleic Acids Research. 2003, 31: e68-10.1093/nar/gng068.
Reddy PS, Mahanty S, Kaul T, Nair S, Sopory SK, Reddy MK: A high-throughput genome-walking method and its use for cloning unknown flanking sequences. Analytical Biochemistry. 2008, 381: 248-253. 10.1016/j.ab.2008.07.012.
Tan GH, Gao Y, Shi M: Site Finding-PCR: a simple and efficient PCR method for chromosome walking. Nucleic Acids Research. 2005, 33: e122-10.1093/nar/gni124.
Siebert PD, Chenchik A, Kellogg DE, Lukyanov KA, Lukyanov SA: An improved PCR method for walking in uncloned genomic DNA. Nucleic Acids Research. 1995, 23: 1087-1088. 10.1093/nar/23.6.1087.
Huang HQ, Wang GZ, Zhao YY: Direct and efficient cloning of full-length genes from environmental DNA by RT-qPCR and modified TAIL-PCR. Appl Microbiol Biotechnol. 2010, 87: 1141-1149. 10.1007/s00253-010-2613-4.
Uchiyama T, Watanabe K: Improved inverse PCR scheme for metagenome walking. BioTechniques. 2006, 41: 183-188. 10.2144/000112210.
Wang S, He J, Cui Z, Li S: Self-formed adaptor PCR: a simple and efficient method for chromosome walking. Appl Environ Microbiol. 2007, 73: 5048-5051. 10.1128/AEM.02973-06.
He YH, Gan SS: Identical promoter elements are involved in regulation of the OPR1 gene by senescence and jasmonic acid in Arabidopsis. Plant Molecular Biology. 2001, 47: 595-605. 10.1023/A:1012211011538.
Schneeberger RG, Zhang K, Tatarinova T, Troukhan M, Kwok SF, Drais J, Klinger K, Orejudos F, Macy K, Bhakta A, Burns J, Subramanian G, Donson J, Flavell J, Feldmann KA: Agrobacterium T-DNA integration in Arabidopsis is correlated with DNA sequence compositions that occur frequently in gene promoter regions. Funct Integr Genomics. 2005, 5: 240-253. 10.1007/s10142-005-0138-1.
Liu YG, Whittier RF: Thermal Asymmetric Interlaced PCR: Automatable Amplification and Sequencing of Insert End Fragments from PI and YAC Clones for Chromosome Walking. Genomics. 1995, 25: 674-681. 10.1016/0888-7543(95)80010-J.
Liu FY, Ma B, Zhao Y: Characterization of the gene encoding glycoprotein C of duck enteritis virus. Virus Genes. 2008, 37: 328-332. 10.1007/s11262-008-0266-5.
Satyanarayana KV, Chandrashekar A, Ravishankar GA: Evaluation of PCR-based methods for isolating flanking regions of genes. Molecular Biotechnology. 2006, 32: 111-116. 10.1385/MB:32:2:111.
Luo P, Su T, Hu CQ, Ren CH: A Novel and Simple PCR Walking Method for Rapid Acquisition of Long DNA Sequence Flanking a Known Site in Microbial Genome. Mol Biotechnol. 2011, 47: 220-228. 10.1007/s12033-010-9332-z.
Yu J, Pei JJ, Song X: Restriction Site-dependent PCR: An Efficient Technique for Fast Cloning of New Genes of Microorganisms. DNA research. 2007, 14: 283-290.
Huang HQ, Wang GZ, Zhao YY, Shi P, Luo H, Yao P: Direct and efficient cloning of full-length genes from environmental DNA by RT-qPCR and modified TAIL-PCR. Applied Microbiology and Biotechnology. 2010, 87: 1141-1149. 10.1007/s00253-010-2613-4.
Yang C, Zhang J, Xu Q, Xiong C, Bao M: Establishment of AFLP technique and assessment of primer combinations for Mei Flower. Plant Molecular Biology Reporter. 2005, 23: 790-791.
He YH, Ning GG, Sun YL, Qi YC, Bao MZ: Identification of a SCAR marker linked to a recessive male sterile gene (Tems) and its application in breeding of marigold (Tagetes erecta L.). Plant breeding. 2009, 128: 92-96. 10.1111/j.1439-0523.2008.01536.x.
This research was supported by the National Natural Science Foundation of China (Grant no. 30800761) and the International Foundation for Science (Grant No.D/4349-1). We thank Dr. Alex McCormac (Mambo-Tox Ltd., UK) for critical editing of the manuscript.
ZW, SY and JL performed the experiments. ZW drafted the manuscript. BZ and MB finalized the paper. GN conceived and developed the FPNI-PCR procedure and supervised the project. All authors read and approved the final manuscript.
Electronic supplementary material
Additional file 1: Tables for listing different used primers. Table S1. AD primer (arbitrary degenerate primers) and universal primers used in this study. Table S2. FP primers (exhibiting restriction site) and the corresponding universal primers used in FPNI-PCR. Table S3. FP primers (exhibiting hair pin structure) and the corresponding universal primers used in FPNI-PCR. Table S4. Gene specific primers used to generate the electrophoresis patterns presented in this paper. Table S5: Gene specific primers used to generate the electrophoresis patterns presented when conducting genomic walking in Arabidopsis and rice. (PDF 72 KB)
Additional file 2: Supporting figures employed in main text. Figure S1. Illustration of the effect of annealing temperature during the low stringency PCR cycles in the primary PCR step in FT ortholog cloning of Fragaria ananassa using FPNI-PCR (amplified products after the secondary round of PCR). M: molecular marker; number in the lanes: 1-9 FP primer; number in the bottom right corner: annealing temperature. -: control. Figure S2. Amplified products after the tertiary round of PCR in genomic walking and T-DNA flanking sequence cloning using FPNI-PCR for the 3 genes of wuschel family from Arabidopsis (a), and Osft, Osmads1 and Ostuba1 genes from rice (b) (FP primer indicated by number in photos). (PDF 524 KB)
About this article
Cite this article
Wang, Z., Ye, S., Li, J. et al. Fusion primer and nested integrated PCR (FPNI-PCR): a new high-efficiency strategy for rapid chromosome walking or flanking sequence cloning. BMC Biotechnol 11, 109 (2011) doi:10.1186/1472-6750-11-109
- Petunia Hybrida
- Chromosome Walking
- Rosa Hybrida
- Nonspecific Product
- Fusion Primer