- Research article
- Open access
- Published:
Characterization and optimization of ArtinM lectin expression in Escherichia coli
BMC Biotechnology volume 12, Article number: 44 (2012)
Abstract
Background
ArtinM is a d-mannose-specific lectin from Artocarpus integrifolia seeds that induces neutrophil migration and activation, degranulation of mast cells, acceleration of wound healing, induction of interleukin-12 production by macrophages and dendritic cells, and protective T helper 1 immune response against Leishmania major, Leishmania amazonensis and Paracoccidioides brasiliensis infections. Considering the important biological properties of ArtinM and its therapeutic applicability, this study was designed to produce high-level expression of active recombinant ArtinM (rArtinM) in Escherichia coli system.
Results
The ArtinM coding region was inserted in pET29a(+) vector and expressed in E. coli BL21(DE3)-Codon Plus-RP. The conditions for overexpression of soluble ArtinM were optimized testing different parameters: temperatures (20, 25, 30 or 37°C) and shaking speeds (130, 200 or 220 rpm) during induction, concentrations of the induction agent IPTG (0.01-4 mM) and periods of induction (1-19 h). BL21-CodonPlus(DE3)-RP cells induced under the optimized conditions (incubation at 20°C, at a shaking speed of 130 rpm, induction with 0.4 mM IPTG for 19 h) resulted in the accumulation of large amounts of soluble rArtinM. The culture provided 22.4 mg/L of rArtinM, which activity was determined by its one-step purification through affinity chromatography on immobilized d-mannose and glycoarray analysis. Gel filtration showed that rArtinM is monomeric, contrasting with the tetrameric form of the plant native protein (jArtinM). The analysis of intact rArtinM by mass spectrometry revealed a 16,099.5 Da molecular mass, and the peptide mass fingerprint and esi-cid-ms/ms of amino acid sequences of peptides from a tryptic digest covered 41% of the total ArtinM amino acid sequence. In addition, circular dichroism and fluorescence spectroscopy of rArtinM indicated that its global fold comprises β-sheet structure.
Conclusions
Overall, the optimized process to express rArtinM in E. coli provided high amounts of soluble, correctly folded and active recombinant protein, compatible with large scale production of the lectin.
Background
Lectins are proteins displaying at least one non-catalytic domain, which specifically and reversibly binds to mono or oligosaccharides [1]. Lectins are known as being an extremely useful tool for carbohydrate investigation on cell surfaces, for glycoproteins isolation and characterization, and for lymphocytes polyclonal activation. Numerous lectins have been isolated from many organisms ranging from viruses and bacteria to plants and animals, and they are known to play a key role in a variety of biological processes (reviewed in [2]). Plant lectins have many biomedical applications (reviewed in [3]), including targeted drug delivery (reviewed in [4]) and therapy against several kinds of tumors and infections [5].
ArtinM is a d-mannose-binding lectin from seeds of Artocarpus integrifolia that stimulates macrophages and dendritic cells to produce IL-12 [6], an activity triggered by the ArtinM interaction with the N-glycans of TLR2 [7], and is able to induce Th1 biased immune response. As a consequence, ArtinM administration to mice has been shown to confer resistance to Leishmania [6, 8], and Paracoccidioides brasiliensis[7] infections. The lectin ArtinM is also capable of inducing neutrophil haptotactic migration mediated by the simultaneous interaction of its carbohydrate recognition domains (CRDs) with cell surface N-glycans (linked to the CXCR2 molecule) [9] and extracellular matrix N-glycans (linked to laminin) [10–12]. An amplification loop for the in vivo ArtinM inflammatory activity is provided by mast cell degranulation, which is most likely due to the lectin interaction with glycans on FcRI [13]. In addition, ArtinM is able to accelerate the process of wound healing and epithelial tissue regeneration [14]. Therefore, ArtinM has biomedical applications and is a potential pharmaceutical agent. In this study we have aimed to produce high-level expression of active soluble rArtinM in E. coli system.
Results and discussion
Optimization of soluble rArtinM expression in E. coli
The number of recombinant proteins used for therapeutic applications has increased dramatically [15]. In this work, the ArtinM coding region was amplified by PCR, using as template the cDNA clone pLL29 described previously [16]. The primers used were designed to create an NdeI and a BamHI sites at the initiation and termination codons, respectively. The amplified product was about 460 bp (not shown), which is in accordance with the length of the ArtinM coding region (453 bp). This PCR fragment was digested with NdeI and BamHI, and cloned into the NdeI and BamHI sites of the pET29a(+) expression vector. The resulting construction was confirmed by restriction analysis and sequencing (not shown) and named pET29-ArtinM.
Considering recombinant protein solubility as an indication of its correct folding and activity, our goal was to establish the conditions to obtain high production of soluble protein. Therefore, pET29-ArtinM was introduced in E. coli BL21-CodonPlus(DE3)-RP, a strain that contains the T7 expression system and extra copies of the argU and proL tRNA genes. This strain was chosen because the ArtinM sequence analysis revealed several rare codons (not shown). In our study, different conditions were assayed to determine those able to provide optimal overexpression of soluble ArtinM and four parameters were tested: temperature and shaking speed during induction, concentration of the induction agent (IPTG) and period of induction (for details see Methods). These four parameters were shown to be important in affecting the amount and the solubility of rArtinM. Figure 1 shows the comparison between the results obtained in two different conditions: one in which large amounts of rArtinM was produced (incubation at 37°C, at a shaking speed of 220 rpm, induction with 1.0 mM IPTG for 19 h), but in a insoluble form (Figure 1A), and the optimized conditions (incubation at 20°C, at a shaking speed of 130 rpm, induction with 0.4 mM IPTG for 19 h), in which the highest amount of soluble rArtinM was produced (Figure 1B).
Taking advantage of the specificity of the carbohydrate recognition property of ArtinM, the recombinant lectin was purified from the E. coli lysate by affinity chromatography on a d-mannose column, and was eluted with 0.1 M d-mannose in PBS, providing the profile showed in Figure 2A. Such purification process by itself certifies that the sugar binding activity of rArtinM was preserved. Measurements by BCA assay (see Methods) revealed an average yield of 22.4 mg rArtinM per liter of culture. The rArtinM has been analyzed through TSK-G2000sw gel-filtration column and the elution profile showed a single peak of 16 kDa, consistent with the monomer molecular mass. Meanwhile, as expected, the jArtinM was eluted in a volume compatible with the tetramer molecular mass (Figure 2B). The homogeneity of rArtinM was confirmed by SDS-PAGE (Figure 2C). Taken together, these results show that the rArtinM produced in E. coli is monomeric and capable to bind d-mannose.
Production of recombinant proteins in active and highly purified form for biomedical research, biotechnology, and pharmaceutical industry is a huge challenge. The major and frequent difficulty in expressing a heterologous protein in a bacterial system concerns the tendency of the recombinant protein to become insoluble [17]. Our data shows that in the optimized conditions here defined (incubation at 20°C, at a shaking speed of 130 rpm, induction with 0.4 mM IPTG for 19 h), soluble and active ArtinM is produced in large quantities in the E. coli expression system.
rArtinM and jArtinM have similar primary structure
rArtinM was characterized by mass spectrometry and N-terminal amino acid sequencing by automated Edman degradation. Electrospray ionization mass spectrometry (ESI-MS) has been regularly used to characterize recombinant proteins, since it is a rapid and precise method for determining molecular mass of proteins and peptides and can be used to validate protein sequences [18, 19]. Therefore, a sample of purified rArtinM has been analyzed by ESI-triple quadrupole – mass spectrometer. MaxEnt 1 algorithm was used for de-convolution of multiple envelop ions which determined that rArtinM has a molecular mass of 16,099.5 Da (Figure 3A). It is in good agreement with the molecular mass determined for jArtinM (masses of 16,101.5 and 16,114.5 Da for the two major isoforms - data not shown) and the average molecular mass (16,124.11 Da) calculated from the amino acid sequence [20]. Amino acid sequencing of peptides derived from trypsin digestion of rArtinM, performed by ESI-MS peptide mass fingerprinting (PMF) and collision induced dissociation (CID-MS/MS) has covered 41% of the total ArtinM amino acid sequence (Figure 3B, Table 1). The spectrum of C-terminal peptide (Figure 3C) confirmed that rArtinM C-terminal sequence was equal to jArtinM (Table 1). N-terminal sequencing showed that the first 20 amino acids are in accordance with the sequence of jArtinM, except for the substitution of glutamine (Q) for arginine (R) at residue 3 (Figure 3D), which was confirmed by Edman degradation and mass spectrometry. This substitution was due to an unintentional mutation introduced at the cloned sequence, as verified by DNA sequencing. Mass spectrometry detected this new trypsin cleavage site correspondent to a tryptic peptide at residues 4 to 27 (Table 1). N-terminal sequencing by Edman degradation of rArtinM indicates that the recombinant protein was not acetylated at the N-terminal, a modification that was found in jArtinM [20]. The absence of N-acetylation (−42 Da) at the N-terminal and replacement of Q for R (+28 Da) account for a molecular mass of 16,113.5, which is close to native isoforms (16,101.5 and 16,114.5 Da).
The absence of the initial methionine at the rArtinM N-terminus, as in the mature jArtinM, was an interesting and unexpected finding. Recombinant proteins produced in E. coli cytosol often possess the methionine, corresponding to the translational initiation codon (ATG), at the N-terminus [21]. In a significant fraction of the E. coli endogenous cytosolic proteins, this N-terminal methionine residue is excised by a methionylaminopeptidase (MAP) [22]. Biochemical and genetic studies indicated that the major determinant for cleavage by MAP is the amino acid occupying the N-terminal penultimate position or, in other words, the second amino acid [23, 24]. According to the generally accepted rules for MAP, one of the highest cleavage probabilities is found when Ala is the second amino acid [24, 25], as in the ArtinM sequence. Therefore, it is reasonable to propose that the N-terminal methionine of the rArtinM was efficiently processed in E. coli BL21-CodonPlus(DE3)-RP by endogenous MAPs.
The rArtinM has secondary and tertiary structures equivalent to the jArtinM
Circular dichroism spectra (CD) and fluorescence spectroscopy of rArtinM and jArtinM were obtained in order to evaluate the correct folding of the recombinant protein and determine some structural details (data not shown). The analysis of secondary structure content showed that rArtinM contained predominantly β-sheet structure, as characterized by the positive ellipicity at wavelength 195 nm and the negative ellipticity at 218 nm. Fluorescence measurements were performed in order to verify the presence of tertiary structure, all emission spectra were recorded from 300 – 450 nm with excitation at 280 nm (data not shown). Thus, our CD spectrum and the fluorescence analysis indicated that rArtinM is correctly folded and has a defined conformational structure suitable for comparative functional studies.
Functional analysis of rArtinM using glycan array
The characterization of the specificities of glycan-binding proteins is of primary importance for a recombinant lectin, and the glycan array has been an important tool for this investigation. The specificity of the fluorescence-labelled lectins was evaluated by binding to the 406 oligosaccharides present on the glycan array available at the Consortium for Functional Glycomics. The glycan array profile for both native (jArtinM) and recombinant ArtinM reveals that both lectin forms recognized with high affinity the same subsets of complex-type biantennary N-glycans containing Manα1-3(Manα1-6)Manβ1-4GlcNAcβ1-4GlcNAcβ (data not shown). This result is coherent with our recent observation that native and recombinant ArtinM interact with equivalent kinetic rates and affinity equilibrium constants to horseradish peroxidase glycoprotein [26], a N-glycosylated protein that contains the trimannoside Manα1-3[Manα1-6]Man, which is a known ligand for jArtinM [27].
IL-12 inducing property of jArtinM is preserved in rArtinM
Functionally, we had previously demonstrated that jArtinM induces IL-12 production by macrophage cell lines, as well as peritoneal and spleen macrophages [6, 7]. To determine whether this property of jArtinM was preserved in rArtinM, we next verified the in vitro IL-12p70 production by spleen macrophages stimulated with 5 μg/ml of rArtinM (Figure 4). We observed that the rArtinM-stimulated macrophages released IL-12 in culture supernatants in concentrations that were similar to the induced by the native protein, demonstrating that the rArtinM produced in E. coli preserved this biological activity exerted by the plant jArtinM. This fact is conceptually acceptable, because IL-12 production is triggered by ArtinM interaction with type 2 toll-like receptor, whose usual agonists are low molecular mass microbial components, unable to enclose more than one site of interaction with the receptor. However, it is expected that ArtinM activities that depend on receptor cross-linking to be triggered, such as mast cell degranulation, will not reproduced by the monomeric recombinant lectin.
Conclusion
Considering the potential use of ArtinM as an immunotherapeutic molecule, this study was designed to produce high-level of soluble/active rArtinM in E. coli system, for both research and pharmaceutical purposes. Here we report a high-yield production of rArtinM lectin using pET29a(+) and BL21-CodonPlus(DE3)-RP as expression system, and its characterization by SDS–PAGE, one-step purification through immobilized d-mannose affinity chromatography, circular dichroism (CD), fluorescence spectroscopy, glycoarray analysis and IL-12 production. Several evidences indicate that the final product, rArtinM, is correctly folded, biochemically active and endowed of biological properties exerted by the plant lectin ArtinM. Taken together, our data provides evidences that rArtinM will be a useful tool for future biomedical studies and that E. coli expression system is appropriate to produce large quantities of functional ArtinM for industrial purposes.
Methods
Cloning the ArtinM coding region in a E. coli expression vector
The coding region of the ArtinM lectin was amplified by PCR using as template the cDNA clone pLL29 previously described [16]. The primers (forward -5’gaaggtgaatcatATGgcgagccag3’ and reverse - 5’ggacatattggatccCTAaagtgcc3’) used for cloning the ArtinM coding region introduced the restriction site NdeI (underlined) at the initiation codon (capital letters) and the BamHI site (underlined) just after the stop codon (capital letters). These primers were used for amplification with the TripleMaster polymerase (Eppendorf, Hamburg, Germany), under the following PCR conditions: 3 min at 94°C followed by 35 cycles of 1 min at 94°C, 45 s at 55°C, and 1 min at 72°C; the final extension was for 7 min at 72°C. The PCR product was digested with the NdeI and BamHI restriction enzymes, separated on a 1% agarose gel and extracted from the gel using a phenol/chloroform protocol. The pET-29a(+) vector was digested with the same two enzymes and purified from a 1% agarose gel. The digested PCR fragment of ArtinM (453 bp) was ligated into the linearized vector pET-29a(+). The resulting vector, named pET29-ArtinM, was confirmed by restriction analyses and sequencing and introduced in E. coli BL21-CodonPlus(DE3)-RP cells by electroporation.
Optimization of ArtinM expression
E. coli BL21-CodonPlus(DE3)-RP transformants were inoculated in 5 mL of Luria–Bertani (LB) medium supplemented with kanamycin 50 μg/mL and cultivated overnight at 37°C. This pre-culture was used to inoculate (1:100) a 100 mL LB medium containing kanamycin, which was cultivated at 37°C until reaching a DO600nm of 0.5-0.6. Then, an aliquot of 10 mL was collected (T0) and IPTG was added. To optimize ArtinM expression, IPTG was tested at different final concentrations (0.01, 0.05, 0.1, 0.2, 0.4, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 mM). After the addition of IPTG, each culture was incubated at different temperatures (20, 25, 30 or 37°C), under different shaking speeds (130, 200 or 220 rpm), for different incubation periods (1, 2, 4, 8, 16 and 19 hours). Aliquots (10 mL) were collected at these specific time points to evaluated rArtinM expression. Cells were pelleted by centrifugation at 5,000 × g at 4°C for 5 min, the culture medium was discarded and cells ressuspended in lysis buffer (10 mM Tris–HCl, 300 mM NaCl, 1 mM EDTA, 5 mM DTT, 100 μg/mL lysozyme, 0.5% (v/v) glycerol and protease inhibitors). The homogenates were sonicated 4 times for 30 seconds, with 30 seconds interval between each sonication and then, centrifuged to separate supernatant and pellet. These samples were quantified and analyzed by SDS-PAGE.
For the additional analyses of rArtinM, a pre-culture aliquot of 1.5 mL was used to inoculate 150 mL LB medium. Cells were cultivated at 37°C to an OD600nm of about 0.6. Then temperature was decreased to 20°C and the expression of ArtinM was induced by the addition of 0.4 mM IPTG (Appli-Chem GmbH, Darmstadt, Germany) and cells were allowed to grow for another 19 h at 130 rpm. Cells were harvested by centrifugation at 8,000 × g at 4°C for 20 min. The cell pellets were used immediately for protein purification or frozen in liquid nitrogen and stored at −70°C.
ArtinM Affinity Purification
jArtinM, extracted from Artocarpus integrifolia seeds, was purified as previously described [28]. E. coli BL21-CodonPlus(DE3)-RP was used to express rArtinM as described above and soluble proteins were obtained through bacterial sonication and centrifugation at 25,000 × g for 15 min. The supernatants were submitted to affinity-chromatography on a d-mannose column, previously equilibrated at 4°C with PBS containing 0.5 M NaCl. After washing with equilibrating buffer, the adsorbed material was eluted with 0.1 M d-mannose in equilibrating buffer. The obtained preparation was ultradiafiltered against PBS, using YM10 membrane (Amicon Division, W.R. Grace, Beverly, MA). ArtinM preparations contained less than 0.05 ng/ml of bacterial endotoxin, as determined by the Limulus amoebocyte lysate assay (Sigma Chemical Co., St. Louis, MO).
Protein analyses
Protein quantification was performed through the bicinchoninic acid (BCA) assay (Sigma Chemical Co., St. Louis, MO), using BSA as standard [29]. Protein electrophoresis was carried out by conventional SDS–PAGE and the gels have been stained with Coomassie blue R-250 (Sigma Chemical Co., St. Louis, MO).
Analytical size exclusion chromatography
Analytical size exclusion chromatography was performed on a TSK-G2000sw (30 cm × 7.8 mm, Tosoh) equilibrated in 50 mM KH2PO4, 300 mM NaCl, pH 7.4. The column was calibrated with bovine thyroglobulin (669 kDa), immunoglobulin G (157 kDa), ovalbumin (45 kDa), and myoglobin (17 kDa) (Sigma).
Mass spectrometric analysis of ArtinM
Native and recombinant Artin M were desalted in POROS R2 (Perseptive Biosystem, Foster City, CA) and about 2.5 μg of each sample was directly infused by syringe pump (Harvard Apparatus, Holliston, MA) into a triple-quadrupole mass spectrometer (Quattro II, Micromass, Manchester, UK) equipped with an electrospray ion source. Fifteen scans were collected between 400 and 2000 amu, and the molecular weight was determined after de-convolution of multi-charged ions spectrum by MaxEnt1 algorithm (MaxLynx software v3.3, Micromass, Manchester, UK).
Peptide mass fingerprint of rArtinM
An aliquot of 2.5 μg of rArtin M was heated denatured and subjected to enzymatic digestion with 0.5 μg of modified trypsin (Promega, Madison, WI, USA) for 24 h at 37°C. The enzyme reaction was stopped with 5 μL of neat formic acid. The tryptic peptides were desalted in POROS R2 (Perseptive Biosystem) previously activated with methanol, equilibrated in 0.2% formic acid and the peptides were eluted in 60% methanol, 5% formic acid. The MS analysis of tryptic peptides was carried out by ESI-triple quadrupole MS (Quattro II, Micromass, Manchester, UK) at the mass range of 400–1500 u.m.a. and the peptide ions were selected to collision induced dissociation (CID-MS/MS) to produce fragments pattern mainly type b and y which were used for deduction of amino acid sequences.
Spectroscopic characterization of recombinant ArtinM
Far UV circular dichroism spectra were performed using a Jasco J-810 spectropolarimeter in the wavelength range of 190–280 nm. Measurements were made on the purified ArtinM lectin (native and recombinant) at a concentration of 0.5 mg/mL, using quartz cuvettes of 0.l mm path length. Spectra were typically recorded as the average of 6 scans. CD spectra were obtained in milli-degrees and converted to molar ellipticity. Intrinsic tryptophan fluorescence emission (IFTE) spectra were measured using a SLM-AMINCO 8100c (Spectronic Instruments) between 300 and 450 nm using an excitation wavelength of 280 nm at protein concentration of 5 mg/ml. The excitation and emission slit widths fixed at 4 nm and the photomultiplier tube voltage was 600 V. In all spectroscopic measurements the buffer was saline (150 mM NaCl).
Glycoarray analysis
A high-throughput screening for identify lectin-ligand interactions was performed by the standard procedure of Core H of the Consortium for Functional Glycomics [30]. Briefly, synthetic glycans functionalized with a spacer and terminating NH2 groups were spotted onto NHS-activated microscope slides (Slide H). Lectins at a concentration of 20–200 μg/mL in a buffer of PBS containing 0.005%–0.5% Tween-20 were incubated on the arrays for 30–60 min. The lectins were tagged with a Fluorescein isothiocyanate (FITC, Molecular Probes). The arrays were washed and immediately scanned for fluorescence using a microarray scanner. Image analysis software was used to quantify the fluorescence intensities at each glycan spot. The data from six replicate spots were averaged to achieve a final value.
Spleen cell cultures
Suspensions of spleen cells from the C57BL/6 were washed in RPMI-I (RPMI 1640 - Flow Laboratories, Inc., McLean, VA) and treated with lyses buffer (9 parts of 0.16 M ammonium chloride and 1 part of 0.17 M Tris–HCl, pH 7.5) for 4 min. The erythrocyte-free cells were then washed three times in RPMI-I, resuspended in RPMI-C (containing 2 mM L-glutamine, 50 μM 2-mercaptoethanol, 100 U/ml penicillin, 100 μg/ml streptomycin [Sigma-Aldrich] and 5% heat-inactivated fetal calf serum [Hyclone, Logan, UT]), and dispensed in 24-well cell culture plates (1 × 107 cells/well). After 2–4 h incubation at 37°C, the non-adherent cells were removed by exhaustive washing with RPMI-I, and the adherent cells were incubated with jArtinM (5 μg/ml), rArtinM (5 μg/ml), and zymosan (10 μg/ml) – which had been previously boiled for 30 min and washed twice with PBS. After 48 h incubation, the supernatants were harvested by centrifugation and stored at −20°C until IL-12p40 ELISA was performed.
IL-12p40 ELISA
The levels of IL-12p40 in the macrophage supernatants were measured by capture enzyme-linked immunosorbent assay (ELISA) with antibody pairs purchased from Pharmingen (Pharmingen, San Diego, USA). The ELISA procedure was performed according to the manufacturer’s protocol. The IL-12p40 concentration was determined with reference to a standard curve for murine recombinant IL-12.
Misc
Maria-Cristina S Pranchevicius and Leandro L Oliveira contributed equally to this work.
References
Peumans WJ, Van Damme EJ: Lectins as plant defense proteins. Plant Physiol. 1995, 109 (2): 347-352. 10.1104/pp.109.2.347.
Sharon N, Lis H: History of lectins: from hemagglutinins to biological recognition molecules. Glycobiology. 2004, 14 (11): 53R-62R. 10.1093/glycob/cwh122.
Van-Damme EJ, Peumans WJ, Barre A, Rouge P: Plant lectins: a composite of several distinct families of structurally and evolutionary related proteins with diverse biological roles. Crit Rev Plant Sci. 1998, 17: 575-692.
Bies C, Lehr CM, Woodley JF: Lectin-mediated drug targeting: history and applications. Advanced Drug Delivery Reviews. 2004, 56 (4): 425-435. 10.1016/j.addr.2003.10.030.
Hajto T, Hostanska K, Berki T, Palinkas L, Boldizsar F, Nemeth P: Oncopharmacological perspectives of a plant lectin (viscum album agglutinin-i): overview of recent results from in vitro experiments and in vivo animal models, and their possible relevance for clinical applications. Evid Based Complement Alternat Med. 2005, 2 (1): 59-67. 10.1093/ecam/neh058.
Panunto-Castelo A, Souza MA, Roque-Barreira MC, Silva JS: KM(+), a lectin from Artocarpus integrifolia, induces IL-12 p40 production by macrophages and switches from type 2 to type 1 cell-mediated immunity against Leishmania major antigens, resulting in BALB/c mice resistance to infection. Glycobiology. 2001, 11 (12): 1035-1042. 10.1093/glycob/11.12.1035.
Coltri KC, Oliveira LL, Pinzan CF, Vendruscolo PE, Martinez R, Goldman MH, Panunto-Castelo A, Roque-Barreira MC: Therapeutic administration of KM + lectin protects mice against Paracoccidioides brasiliensis infection via interleukin-12 production in a toll-like receptor 2-dependent mechanism. Am J Pathol. 2008, 173 (2): 423-432. 10.2353/ajpath.2008.080126.
Teixeira CR, Cavassani KA, Gomes RB, Teixeira MJ, Roque-Barreira MC, Cavada BS, da Silva JS, Barral A, Barral-Netto M: Potential of KM + lectin in immunization against Leishmania amazonensis infection. Vaccine. 2006, 24 (15): 3001-3008. 10.1016/j.vaccine.2005.11.067.
Pereira-da-Silva G, Moreno AN, Marques F, Oliver C, Jamur MC, Panunto-Castelo A, Roque-Barreira MC: Neutrophil activation induced by the lectin KM + involves binding to CXCR2. Biochim Biophys Acta. 2006, 1760 (1): 86-94. 10.1016/j.bbagen.2005.09.011.
Ganiko L, Martins AR, Espreafico EM, Roque-Barreira MC: Neutrophil haptotaxis induced by the lectin KM+. Glycoconj J. 1998, 15 (5): 527-530. 10.1023/A:1006947306260.
Ganiko L, Martins AR, Freymuller E, Mortara RA, Roque-Barreira MC: Lectin KM + −induced neutrophil haptotaxis involves binding to laminin. Biochim Biophys Acta. 2005, 1721 (1–3): 152-163.
Rani PG, Bachhawat K, Misquith S, Surolia A: Thermodynamic studies of saccharide binding to artocarpin, a B-cell mitogen, reveals the extended nature of its interaction with mannotriose [3,6-Di-O-(alpha-D-mannopyranosyl)-D-mannose]. J Biol Chem. 1999, 274 (42): 29694-29698. 10.1074/jbc.274.42.29694.
Moreno AN, Jamur MC, Oliver C, Roque-Barreira MC: Mast cell degranulation induced by lectins: effect on neutrophil recruitment. International Archives of Allergy and Immunology. 2003, 132 (3): 221-230. 10.1159/000074303.
Chahud F, Ramalho LN, Ramalho FS, Haddad A, Roque-Barreira MC: The lectin KM + induces corneal epithelial wound healing in rabbits. Int J Exp Pathol. 2009, 90 (2): 166-173. 10.1111/j.1365-2613.2008.00626.x.
Andersen DC, Krummen L: Recombinant protein expression for therapeutic applications. Curr Opin Biotechnol. 2002, 13 (2): 117-123. 10.1016/S0958-1669(02)00300-2.
da Silva LL, de Molfetta-Machado JB, Panunto-Castelo A, Denecke J, Goldman GH, Roque-Barreira MC, Goldman MH: cDNA cloning and functional expression of KM+, the mannose-binding lectin from Artocarpus integrifolia seeds. Biochim Biophys Acta. 2005, 1726 (3): 251-260. 10.1016/j.bbagen.2005.09.006.
Sahdev S, Khattar SK, Saini KS: Production of active eukaryotic proteins through bacterial expression systems: a review of the existing biotechnology strategies. Mol Cell Biochem. 2008, 307 (1–2): 249-264.
Ashton DS, Beddell CR, Green BN, Oliver RW: Rapid validation of molecular structures of biological samples by electrospray-mass spectrometry. FEBS Lett. 1994, 342 (1): 1-6. 10.1016/0014-5793(94)80572-5.
Raftery MJ: Characterization of a mutant recombinant S100 protein using electrospray ionization mass spectrometry. Methods in molecular biology (Clifton, NJ. 2000, 146: 27-39.
Rosa JC, De Oliveira PS, Garratt R, Beltramini L, Resing K, Roque-Barreira MC, Greene LJ: KM+, a mannose-binding lectin from Artocarpus integrifolia: amino acid sequence, predicted tertiary structure, carbohydrate recognition, and analysis of the beta-prism fold. Protein Sci. 1999, 8 (1): 13-24.
Olson KC, Fenno J, Lin N, Harkins RN, Snider C, Kohr WH, Ross MJ, Fodge D, Prender G, Stebbing N: Purified human growth hormone from E. coli is biologically active. Nature. 1981, 293 (5831): 408-411. 10.1038/293408a0.
Hirel PH, Schmitter MJ, Dessen P, Fayat G, Blanquet S: Extent of N-terminal methionine excision from Escherichia coli proteins is governed by the side-chain length of the penultimate amino acid. Proc Natl Acad Sci U S A. 1989, 86 (21): 8247-8251. 10.1073/pnas.86.21.8247.
Schechter I, Berger A: On the size of the active site in proteases. I. Papain. Biochem Biophys Res Commun. 1967, 27 (2): 157-162. 10.1016/S0006-291X(67)80055-X.
Miller CG: Peptidases and proteases of Escherichia coli and Salmonella typhimurium. Annu Rev Microbiol. 1975, 29: 485-504. 10.1146/annurev.mi.29.100175.002413.
Frottin F, Martinez A, Peynot P, Mitra S, Holz RC, Giglione C, Meinnel T: The proteomics of N-terminal methionine cleavage. Mol Cell Proteomics. 2006, 5 (12): 2336-2349. 10.1074/mcp.M600225-MCP200.
Pesquero NC, Pedroso MM, Watanabe AM, Goldman MH, Faria RC, Roque-Barreira MC, Bueno PR: Real-time monitoring and kinetic parameter estimation of the affinity interaction of jArtinM and rArtinM with peroxidase glycoprotein by the electrogravimetric technique. Biosens Bioelectron. 2010, 26 (1): 36-42. 10.1016/j.bios.2010.04.047.
Jeyaprakash AA, Srivastav A, Surolia A, Vijayan M: Structural basis for the carbohydrate specificities of artocarpin: variation in the length of a loop as a strategy for generating ligand specificity. J Mol Biol. 2004, 338 (4): 757-770. 10.1016/j.jmb.2004.03.040.
Santos-de-Oliveira R, Dias-Baruffi M, Thomaz SM, Beltramini LM, Roque-Barreira MC: A neutrophil migration-inducing lectin from Artocarpus integrifolia. J Immunol. 1994, 153 (4): 1798-1807.
Walker JM: The Bicinchoninic Acid (BCA) Assay for Protein Quantitation. The Protein Protocols Handbook. Edited by: Walker JM. 2002, Humana Press, New Jersey, 11-14. 2
Blixt O, Head S, Mondala T, Scanlan C, Huflejt ME, Alvarez R, Bryan MC, Fazio F, Calarese D, Stevens J, et al: Printed covalent glycan array for ligand profiling of diverse glycan binding proteins. Proc Natl Acad Sci U S A. 2004, 101 (49): 17033-17038. 10.1073/pnas.0407902101.
Acknowledgements
We thank Sandra O. Thomaz and Patricia E Vendruscolo for technical support. This work was supported by grants from FAPESP (06/60642-2) and CNPq (Brazil). MCSP, LLO, NCA, MCRB and MHSG are thankful to FAPESP, CAPES and CNPq for their fellowships.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors did not declare any competing interests.
Authors' contributions
MCSP and LLO participated in the design of the study, performed the experiments, analyzed the data and drafted the manuscript. JCR performed the experiments, analyzed the data and drafted the manuscript. NCA analyzed the data. ACP performed the experiments. MCRB and MHSG conceived the study, participated in its design and helped to draft the manuscript. All authors read and approved the final manuscript.
Maria-Cristina S Pranchevicius, Leandro L Oliveira contributed equally to this work.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Pranchevicius, MC.S., Oliveira, L.L., Rosa, J.C. et al. Characterization and optimization of ArtinM lectin expression in Escherichia coli. BMC Biotechnol 12, 44 (2012). https://doi.org/10.1186/1472-6750-12-44
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1472-6750-12-44